This Seam Heater can heat an area of one foot wide by 24 feet long when opened to its operating position. The EXT version has six separate four-foot heating sections that can be turned on and off independent from one another.
This unit is so versatile that it can be attached to a variety of pavers on either side. With an optional automatic thermal output control, this Seam Heater has the capability of maintaining a joint temperature of 250 degrees at paving speeds up to 40 feet per minute on an average day.
This unit is typically used during the paving process to heat a previously laid asphalt mat’s edge while the paver lays its adjoining hot mix. Projects they are being used for include; highways, roads, large parking lots, night work, airport taxiways, and runways.
|Heating Area:||24 Linear FT|
|Dimensions:||L= 166” (transport) 293” (operating) W= 49" (transport) 33” (operating) H= 41" (transport) 33” (operating)|
|Options:||Manual (battery-paver-motion controls) Automatic (same as manual plus automatic temperature regulation & individual box controls)|
|Heating Time:||Avg. 40 FT/Min @ 250°F|
|Fuel Consumption:||At least 1 hr per 4 gallons of LP|
|Usage:||Reheating cold paving joints, stamping extended borders, blending uneven seams.|
- One step operation
- Efficient fuel consumption
- Short heating times
- Light weight design
- Stainless steel construction
- Low maintenance
- Low-power requirements
- Built-in battery charger
- CALL FOR PRICING