The standard Seam Heater can heat an area of one foot wide by 16 feet long when opened to its operating position. It has four separate, four-foot heating sections that can be turned on and off independent from one another.
This unit also has a versatile design that allows it to be attached to a variety of pavers on either side. This unit is also available with the optional automatic thermal output control, which has the capability of maintaining a joint temperature of 250 degrees at paving speeds up to 25 feet per minute on an average day.
This unit is typically used during the paving process to heat a previously laid asphalt mat’s edge while the paver lays its adjoining hot mix. Projects they are being used on include; highways, roads, parking lots, night work, airport taxiway, and runways.
|Heating Area:||16 Linear FT|
|Dimensions:||L= 112" (transport) 214” (operating) W= 49" (transport) 33” (operating) H= 41" (transport) 33” (operating)|
|Options:||Manual (battery-paver-motion controls) Automatic (same as manual plus automatic temperature regulation & individual box controls)|
|Heating Time:||Avg. 25 FT/Min @ 250°F|
|Fuel Consumption:||At least 2 hrs per 4 gallons of LP|
|Usage:||Reheating cold paving joints, stamping extended borders, blending uneven seams.|
- One step operation
- Efficient fuel consumption
- Short heating times
- Light weight design
- Stainless steel construction
- Low maintenance
- Low-power requirements
- Built-in battery charger